Hey Thad I drilled out the rivets and cut off the bolts, and flipped the top spring. The tricky part is getting it all back together with C clamps since you have a reverse curve going on. All the spring leafs ended up on the shop floor a couple of times before I got it right.
2 comments:
Explain how you did that one!
-Thad
Hey Thad
I drilled out the rivets and cut off the bolts, and flipped the top spring. The tricky part is getting it all back together with C clamps since you have a reverse curve going on. All the spring leafs ended up on the shop floor a couple of times before I got it right.
Post a Comment